• Class I, Division 1, Groups C & D, Explosion Proof
• Automatic, audible and visual system
• Double pole, double throw flow switch
• Designed to meet NEMA 4X
• Easily connected to other Emergency Fixture units
• For indoor and outdoor applications
• Universal AC voltage: 90-264 AC, 50-60 Hz
• Extra contacts in central control board and flow switch for remote location hookup
• UL Listed Industrial Control Panel(s) for US and Canada
• Watch the video to learn more

System can easily be connected to most eyewashes (1/2" NPT inlet piping and 5 gpm water inlet source) or combination drench shower/eyewash or drench shower units (1-1/4" NPT inlet piping and 30 GPM water inlet source). Signaling system can also be ordered for installation with the S19-304 Halo™ Heat Trace Combination Unit. If fixture is top-supplied, adequate space must be provided for vertical orientation of sensor. Consult installation manual for specific requirements. Remote location hookup possible by using the contacts in the flow switch junction box or central control box.

 

Emergency fixture signaling system operates from one central control board. The central control offers several different easy to connect inputs and outputs, allowing for direct connection to a building management system and runs on a safe, 24v system. Electrical components are contained with a NEMA 4X rated enclosure.

 

Remote location hookup possible by using contacts in the central control board or contacts in the flow switch junction box.

 

Standard single tone is a Piezo fast beep sound. 108 dB at 2 feet cuts through ambient noise. Multi-tone horn option must be wall-mounted and mounting hardware is installer provided.

 

The horn can be turned off while the signal light continues to flash and the water flows. Switch features auto reset and a remote drop down mounting option.

 

Flashing signal light with corrosion resistant enclosure. Available in amber or red lens.

 

Universal AC Input: 90-264 AC, 50-60 Hz. Max 70 Watts. Max 3.0 Amps.

 

Watertight and completely assembled for easy hookup to signaling system. Double pole, double throw flow switch in either brass or stainless steel construction.

 

Steady state area light with corrosion resistant enclosure. Available in white or red lens. Steady state area light illuminates the surrounding area around the safety fixture.

 

Steady state beacon light with corrosion resistant enclosure. Available in green or blue lens. Steady state light provides overhead assistance to the location of the safety fixture.

 

3' flexible conduit cable provided with four cable glands, plus an additional 6', 12' or 50' cable option for electrical connections to flow switch or power supply.

 

1-1/4" NPT supply for drench or combination showers. 1/2" NPT supply for eyewash.

 

Signaling system can be mounted to fixture piping, an adjacent wall or heat trace unit.