Details
Features:
- Meets or exceeds ANSI/ISEA Standard Z358.1 (Except 5-gallon units)
- HR Models can retrofit to any Bradley pressurized tank with eye wash option only (without drench hose option)
- Prevents freezing down to -10 degrees F
- Secondary thermostat with manual reset prevents over heating of water
Specifications
Insulated heater jacket thermostatically controls water in weather conditions down to -10ºF (-23ºC). Uses a standard 120VAC grounded power cord. Unit operates by activating the large, highly visible, push handle. Highly visible, yellow insulated jacket made of 200 Denier foam-backed nylon oxford w/clear vinyl pocket for electrical connections. Eyewash yoke wrapped with heat trace cable and lined with pipe insulation for further freeze protection. Silicone rubber drum heaters have tension spring and hook fasteners.
Heated portable pressurized eyewash units are not rated for outdoor use.
Standard Equipment
Tank Jacket and Eyewash Yoke Jacket
Highly visible yellow waterproof insulated jacket made of 200 Denier foam-backed nylon w/clear vinyl pocket.
Heaters
280-watt (5-gallon only) and 510-watt (10- and 15-gallon only) drum heaters made of silicone rubber with tension spring and hook fasteners.
Dual Thermostat
75ºF +/- 5º normal operation thermostat in series with 90ºF +/- 5º high limit, manually reset thermostat.
Electric Heat Trace Cable
Self-regulated to -50ºF, thermal rating - 5 watts/foot, service voltage - 120VAC, amperage/wattage - .7 AMP/80 watts at 50ºF unit water temperature.
Pipe Wrap
1.5" OD pipe insulation, 3 ⁄8" thick