ADJUSTFOR Work-Positioning Rope Lanyard (#CSP06C1)

The 6 ft. (1.8 m) adjustfor work-positioning rope lanyard is designed to be used as part of a work-positioning system. The lanyard allows the user to easily regulate the lanyard’s length with one hand when in a workpositioning practice.

The adjustfor fits itself around a structure (tower, pylons, etc.) and attaches to the side-positioning D-rings of the harness (classification AP).

The rope lanyard of the adjustfor goes through the rope adjuster in a way that when a weight is applied, the rope adjuster rotates and locks automatically so that the rope lanyard is at the desired length. This is done in both a smooth and controlled motion when taking in or elongating the rope lanyard’s length.

FEATURES    

• Made of 1⁄2 in. (12.5 mm) diameter Kernmantle® rope and is 6 ft. (1.8 m) long
• Abrasion resistant sheath  
• Friction bend rope adjuster  
• Security sewn end termination
• Rope made from polyester sheath and heatset nylon core

APPLICATIONS  

• Tower climbing  
• Rigging  
• Scaffolding  
• Ladder climbing  
• Tree trimming

APPLICABLE STANDARDS  

• ANSI Z359.4-2007  
• ANSI A10.32-2012  
• OSHA 1926  
• CSA Z259.11-05

WARNING   

• Must  not  be used for fall arrest
• Must be used with a full body harness designed for such purpose
• Must be used with a full fall arrest system